Fujitsu PRIMERGY RX300 S7 - Removing an FBU from the Air Duct; Removing the FBU from the FBU Holder

252 Upgrade and Maintenance Manual RX300 S7
Expansion cards and backup units
9.6.3.3 Removing an FBU from the air duct
Ê "Removing an FBU" on page 248
9.6.3.4 Removing the FBU from the FBU holder
Figure 119: Removing the FBU from the FBU holder
Ê At a slight angle, slide the FBU from under the retaining brackets of the FBU
holder and remove it.