214 Upgrade and Maintenance Manual
RX300 S7
Expansion cards and backup units
– Phillips PH2 / (+) No. 2 screw driver
●
Mounting slot brackets:
– Phillips PH2 / (+) No. 2 screw driver
9.4.1.2 Preliminary steps
Before installing a Modular LAN controller, perform the following steps:
Ê "Disabling BitLocker functionality" on page 85
Ê "Disabling SVOM boot watchdog functionality" on page 86
Ê "Shutting down the server" on page 65
Ê "Disconnecting power cords" on page 66
Ê "Extending the server out of the rack" on page 69.
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page 70.
Ê "Removing the server cover" on page 72
Ê "Removing the air duct" on page 73
To Next Page
Loading...
