192 Upgrade and Maintenance Manual
RX300 S7
Expansion cards and backup units
9.2.1.2 Preliminary steps
Perform the following procedures:
Ê "Opening the rack door" on page 64
Ê "Disabling BitLocker functionality" on page 85
Ê "Disabling SVOM boot watchdog functionality" on page 86
Ê "Shutting down the server" on page 65
Ê "Disconnecting power cords" on page 66
Ê "Extending the server out of the rack" on page 69
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page 70.
Ê "Removing the server cover" on page 72
Ê "Removing the air duct" on page 73
9.2.1.3 Removing PCI slot bracket
Figure 82: Removing the PCI slot bracket (B)
Ê Remove the screw.
Ê Remove the slot bracket.
To Next Page
Loading...
