Fujitsu PRIMERGY RX300 S7 - Removing the Defective ODD; Installing the New ODD; Concluding Steps

356 Upgrade and Maintenance Manual RX300 S7
Accessible drives
Ê "Removing the fan box" on page 183
12.7.3 Removing the defective ODD
Ê "Removing the ODD" on page 352
Figure 205: Removing the ODD latch
Ê Remove the two screws (1).
Ê Remove the ODD latch on the rear of the defective ODD (2).
12.7.4 Installing the new ODD
Ê "Preparing an ODD" on page 348
Ê "Installing an ODD" on page 350
12.7.5 Concluding steps
Perform the following procedures: