198 Upgrade and Maintenance Manual
RX300 S7
Expansion cards and backup units
9.2.2.4 Installing a PCI slot bracket
V CAUTION!
Always replace slot brackets into unused PCI slot openings to comply
with applicable EMC regulations and satisfy cooling requirements.
Figure 86: Installing a PCI slot bracket (A)
Ê Insert a PCI slot bracket into the unused PCI slot opening.
Ê Fasten PCI slot bracket with the screw.
9.2.2.5 Concluding steps
Perform the following procedures:
Ê "Installing the air duct" on page 74
Ê "Mounting the server cover" on page 76
Ê "Sliding the server into the rack" on page 80
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page 77.
Ê "Connecting the server to the power source" on page 81
To Next Page
Loading...
