434 Upgrade and Maintenance Manual
RX300 S7
Front panel
Ê Connect the front LAN cable to the front LAN board.
Figure 271: Connecting front panel cables
Ê Connect the front panel cable to the system board connector FRONT
PANEL.
Ê Connect the front LAN board to system board connector FRONT LAN.
I Ensure that the front LAN board holder snaps in place.
13.3.1.7 Concluding steps
Perform the following procedures:
Ê "Installing the fan box" on page 184
Ê "Installing the air duct" on page 74
Ê "Mounting the server cover" on page 76
Ê "Sliding the server into the rack" on page 80
To Next Page
Loading...
