Fujitsu PRIMERGY RX300 S7 - Installing the HDD Cage

RX300 S7 Upgrade and Maintenance Manual 169
Hard disk drives / solid state drives
7.4.2.6 Installing the HDD cage
Figure 68: Installing the 2.5-inch HDD cage
Ê Secure the 2.5-inch HDD SAS backplane on the drive cage with the screws.
Figure 69: Reconnecting cables to the 4x 2.5-inch HDD SAS backplane
Ê Reconnect all cables to the 2.5-inch HDD SAS backplane:
– Power cable to SAS backplane connector X6
– If applicable power cable to SAS backplane connector X9
– SAS cable to backplane connectors X1