Fujitsu PRIMERGY RX300 S7 - Power Button Override; Starting Up and Operation (Continued); IRMC S3 Power Control

RX300 S7 Upgrade and Maintenance Manual 77
Basic hardware procedures
Figure 19: Mounting the server cover
Ê Close the locking lever on the server cover. This will slide the server cover
shut engaging the locking mechanism.
4.8 Mounting the server in the rack
4.8.1 Seating the server on the rack rails
V CAUTION!
At least two people are needed to position the server on the rack rails.
(For the Japanese market, please refer to " 安全上のご注意 ".)
For configurations below 32 kg:
At least two people are needed to lift the server
into the rack cabinet.
For configurations below 55 kg:
At least three people are needed to lift the server
into the rack cabinet.