RX300 S7
Upgrade and Maintenance Manual 361
Accessible drives
Figure 209: Installing the drive cage with the RDX/DAT drive
Ê Insert the RDX/DAT drive with the cage into the bay.
12.8.5 Connecting the RDX/DAT drive
I Notes on RDX drive USB cabling:
– A USB 2.0 RDX drive may be replaced by a USB 3.0 RDX drive with
previous cabling.
– A USB 3.0 RDX drive may be connected with a USB 2.0 cable to an
onboard USB 2.0 connector with limited performance.
– For full performance, connect the USB 3.0 RDX drive to a USB 3.0
interface card by USB 3.0 cable.
– The USB 3.0 cable cannot be connected to a USB 2.0 RDX drive.
To Next Page
Loading...
