EasyManua.ls Logo

Fujitsu PRIMERGY RX300 S7 - Preparing the SAS RAID Controller

Fujitsu PRIMERGY RX300 S7
560 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
242 Upgrade and Maintenance Manual
RX300 S7
Expansion cards and backup units
Ê Open the server cover as described in section "Removing the server cover"
on page 72 .
9.6.1.3 Preparing the SAS RAID controller
I To connect an FBU to the controller D3116 you need a TFM. Other
controllers so as D9285 can be connected directly.
Figure 108: SAS RAID controller and TFM kit
1 SAS RAID controller D3116
2-3 TFM kit including three pre-assembled spacer bolts and three screws
(A3C40137316 / LSZ:L3-25419-01)

Table of Contents

Other manuals for Fujitsu PRIMERGY RX300 S7

Related product manuals