Fujitsu PRIMERGY RX300 S7 - Removing PCI Slot Bracket; Installing the Modular LAN Controller

RX300 S7 Upgrade and Maintenance Manual 217
Expansion cards and backup units
Ê Connect the NCSI sideband cable to the Modular LAN controller:
I For a complete cabling overview, please refer to section "Cables
overview" on page 525.
9.4.1.4 Removing PCI slot bracket
Ê "Removing PCI slot bracket" on page 192
9.4.1.5 Installing the Modular LAN controller
Ê Remove the Modular LAN controller from its protective packaging.
I For further instructions regarding controller settings, please refer to
the accompanying documentation.
Ê "Preparing the Modular LAN controller" on page 215.
Figure 94: Installing the Modular LAN controller
Connector Cable
20-pin (black) NCSI sideband cable T26139-Y4015-V101