Fujitsu PRIMERGY RX300 S7 - Connecting the RDX;DAT Drive to the System Board

RX300 S7 Upgrade and Maintenance Manual 375
Accessible drives
12.11.5.1 Connecting the RDX/DAT drive to the system board
Figure 220: Connecting the cables to the RDX/DAT drive
Ê Fasten the drive cage with the screw (1).
Ê Connecting the power cable C5 to the RDX/DAT drive (3).
Ê Connecting the USB cable C17 to the RDX/DAT drive (2).
Figure 221: Connecting the USB cable to the system board