Fujitsu PRIMERGY RX300 S7 - Upgrading or Replacing a Processor; Removing the Processor

314 Upgrade and Maintenance Manual RX300 S7
Processors
Ê "Shutting down the server" on page 65
Ê "Disconnecting power cords" on page 66
Ê "Extending the server out of the rack" on page 69
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page 70.
Ê "Removing the server cover" on page 72
Ê "Removing the air duct" on page 73
Ê "Removing processor heat sinks" on page 329
11.4.3 Upgrading or replacing a processor
11.4.3.1 Removing the processor
Figure 167: Opening socket release lever 1