Fujitsu PRIMERGY RX300 S7 - Removing the HDD Cage

166 Upgrade and Maintenance Manual RX300 S7
Hard disk drives / solid state drives
7.4.2.3 Removing the HDD cage
Figure 64: Disconnecting cables from the 4x 2.5-inch HDD SAS backplane
Ê Disconnect all cables from the 4x 2.5-inch HDD SAS backplane:
– SAS / SATA cable
– Power cable
Figure 65: Removing the HDD cage
Ê Remove the screws of the HDD cage.
Ê Slide the HDD cage frontward out.