Fujitsu PRIMERGY RX300 S7 - Required Tools; Preliminary Steps

228 Upgrade and Maintenance Manual RX300 S7
Expansion cards and backup units
V CAUTION!
For further safety information, please refer to chapter "Important
information" on page 43.
9.5.1.1 Required tools
● Preliminary and concluding steps: tool-less
● Installing a BBU: tool-less
9.5.1.2 Preliminary steps
Perform the following procedures:
Ê "Disabling SVOM boot watchdog functionality" on page 86
Ê "Opening the rack door" on page 64
Ê "Shutting down the server" on page 65
Ê "Disconnecting power cords" on page 66
Ê "Extending the server out of the rack" on page 69
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page 70.
Ê Open the server cover as described in section "Removing the server cover"
on page 72 .