RX300 S7
Upgrade and Maintenance Manual 163
Hard disk drives / solid state drives
Figure 63: Installing the 3.5-inch HDD SAS backplane (B)
Ê Reconnect all cables to the 3.5-inch HDD SAS backplane:
– Power cable (C5) to connector X10
– Power cable (C3) to connector X9
– SAS cable (C8) to connector X1
– SAS cable (C9) to connector X2
I For a complete cabling overview, please refer to section "Cables
overview" on page 525.
To Next Page
Loading...
