202 Upgrade and Maintenance Manual
RX300 S7
Expansion cards and backup units
Ê "Enabling BitLocker functionality" on page 107
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I Configuration of network settings should be performed by the
customer.
For further information, please refer to section "Note on network
settings recovery" on page 199.
Ê "After replacing / upgrading LAN controllers" on page 112
Ê "Closing the rack door" on page 84
To Next Page
Loading...
