Fujitsu PRIMERGY RX300 S7 - Important Information (Continued); General Safety Precautions

RX300 S7 Upgrade and Maintenance Manual 39
Before you start
Phillips
PH2 / (+) No. 2
SW6
1 Nm
heat sink captive screw
Phillips
PH1 / (+) No. 1
0.4 Nm
TFM M2.5 x 4 mm
(contained in the
TFM kit
A3C40137316 /
LSZ: L3-25419-01)
Screw driver /
Bit insert /
torque
Screw Usage Type
Table 2: List of required tools and used screws