RX300 S7
Upgrade and Maintenance Manual 473
System board and components
Ê Switch on or restart your server.
Ê As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
Ê Select the Advanced menu.
Ê Select the Trusted Computing submenu.
Ê Set the TPM Support and TPM State settings to Enabled.
Ê Under Pending TPM operation, select the desired TPM operation mode.
Ê Save your changes and exit the BIOS.
I For detailed information on how to access the BIOS and modify
settings, refer to the "System Board D2939 BIOS Setup Utilty"
reference manual available online at http://manuals.ts.fujitsu.com.
Ê "Enabling BitLocker functionality" on page 107
To Next Page
Loading...
