TX150 S8 / TX200 S7
Upgrade and Maintenance Manual 109
6 Power supply units
Safety notes
V CAUTION!
●
Do not disassemble the power supply unit. Doing so may cause
electric shock.
●
Areas around the power supply unit may remain extremely hot after
shutdown. After shutting down the server, wait for hot components to
cool down before removing the power supply unit.
●
When installing a power supply unit, ensure that the connector of the
power supply unit is not damaged or bent.
●
If the power supply unit is hard to remove, do not pull it out by force.
●
The power supply unit is heavy, so handle it carefully. If you drop it by
mistake, injuries may result.
●
For further safety information, please refer to chapter "Important
information" on page 35.
To Next Page
Loading...
Need help?
General