Fujitsu PRIMERGY TX150 S8 User Manual

112 Upgrade and Maintenance Manual TX150 S8 / TX200 S7
Power supply units
6.2 Standard power supply
6.2.1 Basic information
There are two different power supply units:
Figure 37: Standard power supply unit 500 W and 800 W
6.2.2 Replacing the standard power supply unit
I Replacing the standard power supply unit is illustrated by the example of
the power supply unit 500 W for the PRIMERGY TX150 S8.
6.2.2.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 79
Ê "Locating the defective server" on page 47
Ê "Shutting down the server" on page 50
Ê "Disconnecting the server from the mains" on page 50
1 Power supply unit 500 W for the PRIMERGY TX150 S8
2 Power supply unit 800 W for the PRIMERGY TX200 S7
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver

Fujitsu PRIMERGY TX150 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX150 S8
Category	Server
Language	English