Fujitsu PRIMERGY TX150 S8 - Removing the SCU (SKU) Key; Preliminary Steps

TX150 S8 / TX200 S7 Upgrade and Maintenance Manual 373
System board and components
14.5.2 Removing the SCU (SKU) key
14.5.2.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 79
Ê "Shutting down the server" on page 50
Ê "Disconnecting the server from the mains" on page 50
Ê "Getting access to the component" on page 51
14.5.2.2 Removing the SCU (SKU) key
Figure 286: Removing the SCU (SKU) key
Ê Firmly pull up on the release lash until the SCU (SKU) key pops out of its
connector.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less