TX150 S8 / TX200 S7
Upgrade and Maintenance Manual 25
2 Before you start
Before you start any upgrade or maintenance task, please proceed as follows:
Ê Carefully read the safety instructions in chapter "Important information" on
page 35.
Ê Make sure that all necessary manuals are available. Refer to the
documentation overview in section "Documents you need at hand" on
page 32. Print the PDF files if required.
Ê Make yourself familiar with the procedure categories introduced in section
"Classification of procedures" on page 27.
Ê Ensure that all required tools are available according to section "Tools you
need at hand" on page 30.
Installing optional components
The operating manual of your server (see section "Documents you need at
hand" on page 32) gives an introduction to server features and provides an
overview of available hardware options.
Use the Fujitsu ServerView Suite management software to prepare hardware
expansions. ServerView Suite documentation is available online at
http://manuals.ts.fujitsu.com (http://jp.fujitsu.com/platform/server/primergy/system/
for the Japanese market) or from the ServerView Suite DVD 2 supplied with
your PRIMERGY server. Please refer to the following ServerView Suite topics:
– Operation
– Virtualization
– Maintenance
I For the latest information on hardware options, refer to your server’s
hardware configurator available online at the following address:
for the global market:
http://ts.fujitsu.com/products/standard_servers/tower/primergy_tx200s7.html
http://ts.fujitsu.com/products/standard_servers/tower/primergy_tx150s8.html
for the Japanese market:
http://jp.fujitsu.com/platform/server/primergy/system/
To Next Page
Loading...
Need help?
General