Fujitsu PRIMERGY TX150 S8 User Manual

TX150 S8 / TX200 S7 Upgrade and Maintenance Manual 249
Main memory
10.2.2 Installing a memory module
Ê Identify the correct memory slot see section "Memory sequence" on
page 245.
Figure 168: Installing memory modules (A)
Ê Press out the securing clip at each end of the memory slot.
Figure 169: Installing memory modules (B)
Ê Align the notch on the bottom of the module with the crossbar in the slot.
Ê Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.
10.2.3 Concluding steps
Ê "Reassembling" on page 64
Ê "Connecting the server to the mains" on page 74
Ê "Updating or recovering the system board BIOS and iRMC" on page 87 (if
applicable)
Ê "Switching on the server" on page 75
Ê "Enabling SVOM boot watchdog functionality" on page 94
Ê "Verifying the memory mode" on page 96 (if applicable)
Ê "Enabling BitLocker functionality" on page 100

Fujitsu PRIMERGY TX150 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX150 S8
Category	Server
Language	English