Fujitsu PRIMERGY TX150 S8 - Replacing an HDD Extension Box; Preliminary Steps; Removing the Defective HDD Extension Box; Installing the New HDD Extension Box

TX150 S8 / TX200 S7 Upgrade and Maintenance Manual 183
Hard disk drives / solid state drives
Ê "Connecting the server to the mains" on page 74
Ê "Switching on the server" on page 75
Ê "Enabling BitLocker functionality" on page 100
7.4.4 Replacing an HDD extension box
7.4.4.1 Preliminary steps
Ê "Shutting down the server" on page 50
Ê "Disconnecting the server from the mains" on page 50
Ê "Getting access to the component" on page 51
Ê "Removing the system fan holder" on page 76
7.4.4.2 Removing the defective HDD extension box
Ê Remove the HDD extension box as described in section "Removing an HDD
extension box" on page 179.
7.4.4.3 Installing the new HDD extension box
Ê Install the HDD extension box as described in section "Installing an HDD
extension box" on page 172.
7.4.4.4 Concluding steps
Ê "Installing the system fan holder" on page 77
Ê "Reassembling" on page 64
Ê "Connecting the server to the mains" on page 74
Ê "Switching on the server" on page 75
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: tool-less