Fujitsu PRIMERGY TX150 S8 - Connecting Power Cables; Concluding Steps

TX150 S8 / TX200 S7 Upgrade and Maintenance Manual 119
Power supply units
6.2.2.5 Connecting power cables
Ê Connect the power cables see section "Cabling plans" on page 405.
Ê Run the power cable through the cable clamp (see figure 38 or figure 39).
6.2.2.6 Concluding steps
Ê "Installing the system fan holder" on page 77
Ê "Reassembling" on page 64
Ê "Connecting the server to the mains" on page 74
Ê "Enabling BitLocker functionality" on page 100