302 Upgrade and Maintenance Manual
TX150 S8 / TX200 S7
Accessible drives and LSD
12.5.3.5 Installing the new LSD module
Ê Install the LSD module into the Multibay box as described in section
"Installing the LSD module" on page 292.
12.5.3.6 Concluding steps
Ê "Installing the Multibay box" on page 293
Ê "Installing the system fan holder" on page 77
Ê "Reassembling" on page 64
Ê "Connecting the server to the mains" on page 74
Ê "Switching on the server" on page 75
Ê If applicable, "Verifying and configuring the backup software solution" on
page 92
12.6 Slimline ODD and LSD in 2x 3.5-inch HDD
extension box
12.6.1 Installing the slimline ODD or LSD
12.6.1.1 Preliminary steps
Ê "Shutting down the server" on page 50
Ê "Disconnecting the server from the mains" on page 50
Ê "Getting access to the component" on page 51
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Slotted screw driver (for bending in or out accessible drive mounting
brackets)
To Next Page
Loading...
Need help?
General