430 Upgrade and Maintenance Manual
TX150 S8 / TX200 S7
Ê Take the system down to its minimum startup configuration.
Ê "Connecting the server to the mains" on page 74
Ê Connect a keyboard, mouse and display to the server.
Ê Switch on the server as described in section "Switching on the server" on
page 75.
V CAUTION!
Since the fan module is not included in the minimum startup
configuration, the server must be shut down immediately after the
diagnostic process is complete (POST phase has been passed).
The minimum startup configuration must be used exclusively for
diagnostic purposes by maintenance personnel, never in daily
operation!
To Previous Page
Loading...
Need help?
General