Window glass
S-40
strip and glass, a layer of sealant to seal up the
gaps. The thickness of sealant is 14.0mm
{0.55in} and the width 8.0mm {0.31in}.
13. Align the mark on the glass with V-groove of
pad A, and install the glass on the vehicle;
14. Push inward the glass to compress the sealant;
15. Confirm that the clearance of upper edge is
6mm and the lateral clearance 9mm.
Hardening time of sealing material
Temperature
Time of surface
hardening
Time to be
experienced prior to
use of vehicle
5℃{41℉}
Ca. 1.5hrs Ca.12hrs
20℃{68℉}
Ca. 1hr Ca.4hrs
35℃{95℉}
Ca.10min Ca.2hrs
16. Install the roof (See——Roof, Removal/
Installation of Roof)
17. Install the high positioned brake light.
To Next Page
Loading...