Juniper T640 - PIC;FPC Compatibility (Type 4 Fpcs and Type 4 Pics); Table 49: T640 PIC;FPC Compatibility Type 3

Table 49: T640 PIC/FPC Compatibility Type 3 (continued)
T640-FPC3-EST640-FPC3-E2T640-FPC3-ET640-FPC3PIC Model NumberPIC
10-Gigabit Ethernet PICs
9.07.46.36.2PC-1XGE-XENPAK with
10GBASE-ER and
10GBASE-LR transceivers
installed
10-Gigabit
Ethernet, 1-port
XENPAK
9.07.4:7.17.1PC-1XGE-XENPAK with
10GBASE-SR and
10GBASE-ZR transceivers
installed
9.07.57.57.5PC-1XGE-DWDM-CBAND10-Gigabit
Ethernet, 1-port
DWDM
9.49.49.49.4PC-1XGE-DWDM-OTN10-Gigabit
Ethernet, 1-port
DWDM OTN
Services PICs
9.38.38.3–PC-MS-500-3MultiServices 500
9.07.46.35.3PC-TUNNELTunnel Services
SONET/SDH PICs
10.4R2–––PC-4OC48-STM16-IQE-SFP
in a standalone T640 router
This PIC is not supported in
a T640 router connected to
a TX Matrix router.
OC48/STM16 IQE,
4-port SFP
9.07.46.36.2PC-4OC48-SON-SFPOC48c/
STM16, 4-port
SFP
9.07.46.35.3PC-1OC192-SON-VSROC192c /
STM64, 1-port
9.08.18.1–PC-1OC192-SON-XFPOC192c /
STM64, 1-port
XFP
PIC/FPC Compatibility (Type 4 FPCs and Type 4 PICs)
Table 50 on page 94 provides a PIC/FPC compatibility matrix for the current Type 4 PICs
for the T640 router and Type 4 FPCs.
93Copyright © 2017, Juniper Networks, Inc.
Chapter 6: Line Card Components and Description