See “Tools and Parts Required to Install the T640 Router Without a Mechanical Lift”
on page 180.
6. Remove components from the chassis to make it easier to install into the rack or
chassis.
See “Removing Components from the T640 Chassis” on page 180.
7. Install the T640 Chassis in the Rack Manually.
NOTE: With componentsremoved, the chassisweighs approximately 205
lb (93 kg). At least four people are needed to safely lift the chassis into
the rack or cabinet.
See “Installing the T640 Chassis in the Rack Manually” on page 192.
8. Reinstall the components removed from the chassis.
See “Reinstalling Components in the T640 Chassis” on page 195.
Related
Documentation
T640 Router Description on page 3•
Tools and Parts Required to Install the T640 Router Without a Mechanical Lift
To install the T640 router, you need the following tools and parts:
•
Phillips (+) screwdrivers, numbers 1 and 2
•
Flat-blade (–) screwdriver, number 1
•
7/16-in.(11 mm) nut driver or socket wrench
•
ESD grounding wrist strap
Related
Documentation
T640 Router Installation Summary on page 151•
• T640 Installation Safety Guidelines on page 511
Removing Components from the T640 Chassis
If you cannot use a mechanical lift to install the T640 router (the preferred method), you
can install it manually. Before installing the router manually, you must first remove most
components from the chassis, and you must reinstall the components after the router
is installed in the rack. With components removed, the chassis weighs approximately
205 lb (93 kg).
Copyright © 2017, Juniper Networks, Inc.180
T640 Core Router Hardware Guide
To Next Page
Loading...
Need help?
General
