Table 92: SONET/SDH Interface Alarm Messages (continued)
CLI MessageLCD Message
interface-name so-x/x/x - SONET line remote defect
indicator
interface-name so-x/x/x LRDI
interface-name so-x/x/x - SONET path AISinterface-name so-x/x/x PAIS
interface-name so-x/x/x - SONET PLL lockinterface-name so-x/x/x PLL
interface-name so-x/x/x - SONET path mismatchinterface-name so-x/x/x PMIS
interface-name so-x/x/x - SONET path remote defect
indicator
interface-name so-x/x/x PRDI
interface-name so-x/x/x - SONET remote error indicatorinterface-name so-x/x/x REI
interface-name so-x/x/x - SONET severely errored frameinterface-name so-x/x/x SEF
interface-name so-x/x/x - SONET unequippedinterface-name so-x/x/x UNEQ
Related
Documentation
T640 Chassis Description on page 15•
• T640 Craft Interface Alarm LEDs and ACO/LT Button on page 23
• Replacing a T640 Craft Interface on page 265
Troubleshooting the T640 Craft Interface
Problem Description:
The following alarms, LEDs, and other conditions indicate a problem with the craft
interface:
• The router is powered on, but none of the LEDs on the craft interface are lit.
• A yellow alarm indicates that the craft interface has failed.
In Table 93 on page 467, the text in the column labeled ”LCD Message” appears in the
display of the craft interface. The text in the column labeled “CLI Message” appears in
the output from the show chassis alarms command.
Table 93: T640 Chassis Alarm Messages
CLI MessageLCD MessageAlarm Type
Craft FailureCraft FailureYellow
467Copyright © 2017, Juniper Networks, Inc.
Chapter 33: Troubleshooting Components
To Next Page
Loading...
Need help?
General
