CAUTION: Be sure to insert the PC Card with the label facing downward.
Inserting the PC Card incorrectly might damage the Routing Engine.
NOTE: The Routing Engine in your router might have two PC Card slots.
In this case, use either slot. Do not install more than one PC Card in the
Routing Engine.
4. Press the card firmly all the way into the slot.
5. Reinstall the Routing Engine cover and tighten the screws on the corners of the cover
to secure it to the chassis.
Figure 161: Installing a PC Card
Related
Documentation
Maintaining the T640 Host Subsystem on page 447•
• T640 Routing Engine Functions on page 5
Replacing a Solid-State Disk in a T640 RE-C1800 Routing Engine
1.
Preparing to Replace a Solid-State Disk in a T640 RE-C1800 Routing Engine on page 328
2.
Removing a Solid-State Disk in a T640 RE-C1800 Routing Engine on page 328
3.
Installing a Solid-State Disk in a T640 RE-C1800 Routing Engine on page 329
4.
Copying the Junos OS to the Solid-State Disk in a T640 RE-C1800 Routing
Engine on page 330
327Copyright © 2017, Juniper Networks, Inc.
Chapter 27: Replacing Host Subsystem Components
To Next Page
Loading...
Need help?
General
