FPC 2 0.000 0.000 0 0
FPC 3 0.000 0.000 0 0
FPC 4 55.375 9.562 529 70
FPC 5 0.062 0.000 0 0
FPC 6 55.062 9.000 495 66
FPC 7 55.437 9.000 498 66
SCG/CB/SIB 55.375 15.375 851 70
FAN 49.000 7.875 385 51
• For AC-powered routers, the output is similar to the following:
user@host> show chassis environment pem
PEM 1 status:
State Online
Temperature 33 degrees C / 91 degrees F
AC Input: OK
DC Output Voltage(mV) Current(mA) Power(W) Load(%)
FPC 0 55183 7056 389 51
FPC 1 55633 7018 390 52
FPC 2 55533 5187 288 38
FPC 3 55533 7081 393 52
FPC 4 55508 6612 367 48
FPC 5 55791 7337 409 54
FPC 6 55675 2593 144 19
FPC 7 55608 7600 422 56
SCG/CB/SIB 55308 5600 309 25
Related
Documentation
T640 Two-Input 160-A DC Power Supply LEDs on page 98•
• T640 Three-Input 240-A DC Power Supply LEDs on page 100
• T640 Four-Input 240-A DC Power Supply LEDs on page 103
• T640 Six-Input DC Power Supply LEDs on page 105
• T640 Three-Phase Delta and Wye AC Power Supply LEDs on page 109
• Troubleshooting the T640 Power System on page 476
• T640 General Electrical Safety Guidelines and Electrical Codes on page 529
Maintaining the T640 SIBs
Purpose For optimum router performance, verify the condition of the SIBs.
459Copyright © 2017, Juniper Networks, Inc.
Chapter 32: Maintaining Components
To Next Page
Loading...
Need help?
General
