Juniper T640 - Chapter 20 Connecting the T640 to Ground; Tools and Parts Required to Ground the T640 Router; Figure 92: Grounding Lug

CHAPTER 20
Connecting the T640 to Ground
•
Tools and Parts Required to Ground the T640 Router on page 207
•
Connecting the T640 Grounding Cable on page 208
Tools and Parts Required to Ground the T640 Router
•
Grounding cable (which you must provide)
•
Grounding lug (provided with the router)
Figure 92: Grounding Lug
•
M6 screws or UNC 1/4-20 screws
•
Electrostatic discharge (ESD) grounding wrist strap
Related
Documentation
T640 Chassis Grounding Cable and Lug Specifications on page 118•
• Connecting the T640 Grounding Cable on page 208
207Copyright © 2017, Juniper Networks, Inc.