Juniper T640 - Chapter 21 Connecting the T640 to External Devices; Overview of Connecting the T640 Router to External Devices

CHAPTER 21
Connecting the T640 to External Devices
•
Overview of Connecting the T640 Router to External Devices on page 209
•
Tools and Parts Required to Connect the T640 Router to External Devices on page 210
•
Connecting the T640 Router to a Management Console or Auxiliary Device on page 210
•
Connecting the T640 Router to a Network for Out-of-Band Management on page 212
•
Connecting the T640 Router to an External Alarm-Reporting Device on page 214
•
Connecting the T640 Router to an External Clocking Device on page 215
•
Connecting PIC Cables to the T640 Router on page 216
Overview of Connecting the T640 Router to External Devices
After you have grounded the T640 Core Router, you can connect the following external
devices:
•
An external console or auxiliary device to the CONSOLE ports on the Connector Interface
Panel (CIP).
See “Connecting the T640 Router to a Management Console or Auxiliary Device” on
page 210
•
A laptop, modem, or other auxiliary device to the AUXILIARY ports on the Connector
Interface Panel (CIP).
See “Connecting the T640 Router to a Management Console or Auxiliary Device” on
page 210.
•
A management network to the ETHERNET ports on the Connector Interface Panel
(CIP).
See “Connecting the T640 Router to a Network for Out-of-Band Management” on
page 212.
•
An external alarm-reporting device to the alarm relay contacts on the CIP.
See “Connecting the T640 Router to an External Alarm-Reporting Device” on page 214.
•
An external clocking device to the EXTERNAL CLOCK INPUTS on the SONET clock
generator with RJ-48 ports.
See “Connecting the T640 Router to an External Clocking Device” on page 215.
209Copyright © 2017, Juniper Networks, Inc.