Juniper T640 - Installing the T640 Chassis in the Rack Manually; Figure 78: Removing a Power Supply before Installing the Installation; Figure 79: Attaching the Installation Handle

Figure 78: Removing a Power Supply Before Installing the Installation
Handle
Figure 79: Attaching the Installation Handle
Installing the T640 Chassis in the Rack Manually
To install the T640 router in the rack (see Figure 81 on page 195):
CAUTION: If you are installing two routers in one rack, install the lower one
first. Installing a router in the upper position in a rack or cabinet requires a lift.
CAUTION: Before front-mounting the router in a rack, have a qualified
technician verify that the rack is strong enough to support the router's weight
and is adequately supported at the installation site.
Copyright © 2017, Juniper Networks, Inc.192
T640 Core Router Hardware Guide