CHAPTER 14
Installation Overview
•
T640 Router Installation Summary on page 151
T640 Router Installation Summary
It is important to proceed through the installation process in the following order:
1. Prepare your installation site.
See “T640 Site Preparation Checklist” on page 117.
2. Review the safety guidelines.
See “General Safety Guidelines for Juniper Networks Devices” on page 503.
3. Unpack the router and verify the parts received.
“Unpacking the T640 Router” on page 153.
4. Install the mounting hardware.
See “Installing the T640 Mounting Hardware for a Four-Post Rack or Cabinet” on
page 159 or “Installing the T640 Mounting Hardware for an Open-Frame Rack” on
page 162.
5. Install the router.
See “Mounting the T640 Chassis Using a Mechanical Lift” on page 173 or “Installing
the T640 Chassis in the Rack Manually” on page 192.
6. Ground the router.
See “Connecting the T640 Grounding Cable” on page 208.
7. Connect the router to a management device.
See “Connecting the T640 Router to a Management Console or Auxiliary Device” on
page 210.
151Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
