Juniper T640 - Chapter 42 Electrical Safety Guidelines and Warnings; In Case of an Electrical Accident; T640 General Electrical Safety Guidelines and Electrical Codes

CHAPTER 42
Electrical Safety Guidelines and Warnings
•
In Case of an Electrical Accident on page 529
•
T640 General Electrical Safety Guidelines and Electrical Codes on page 529
•
General Electrical Safety Warnings for Juniper Networks Devices on page 530
•
DC Power Electrical Safety Warnings for Juniper Networks Devices on page 534
•
T640 AC Power Electrical Safety Guidelines on page 537
•
Site Electrical Wiring Guidelines for Juniper Networks Devices on page 538
In Case of an Electrical Accident
If an electrical accident results in an injury, take the following actions in this order:
1. Use caution. Be aware of potentially hazardous conditions that could cause further
injury.
2. Disconnect power from the router.
3. If possible, send another person to get medical aid. Otherwise, assess the condition
of the victim, then call for help.
Related
Documentation
General Safety Guidelines for Juniper Networks Devices on page 503•
• General Safety Warnings for Juniper Networks Devices on page 504
T640 General Electrical Safety Guidelines and Electrical Codes
•
Install the router in compliance with the following local, national, or international
electrical codes:
•
United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code.
•
Canada—Canadian Electrical Code, Part 1, CSA C22.1.
529Copyright © 2017, Juniper Networks, Inc.