Figure 77: Removing a T640 FPC
Related
Documentation
T640 Preventing Electrostatic Discharge Damage on page 506•
• T640 FPC Description on page 67
• T640 Switch Interface Boards (SIBs) Description on page 111
• T640 T Series Control Boards (T-CBs) Description on page 64
• T640 Power System Description on page 95
• T640 Cooling System Description on page 31
Attaching the T640 Router Installation Handle
To assist you with the installation of the T640 router, attach the installation handle over
the power supply slots of the chassis. To remove the power supplies and attach the
handle, starting with the upper power supply:
Copyright © 2017, Juniper Networks, Inc.190
T640 Core Router Hardware Guide
To Next Page
Loading...
Need help?
General
