248 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
6 Root (:) Commands
Return Format <value><NL>
<value> ::= integer in NR1 format.
See Also • "Introduction to Root (:) Commands" on page 226
• ":CHANnel<n>:PROTection" on page 319
• ":OPEE (Operation Status Enable Register)" on page 245
• ":OPERegister[:EVENt] (Operation Status Event Register)" on page 249
• ":OVLenable (Overload Event Enable Register)" on page 251
• ":OVLRegister (Overload Event Register)" on page 253
• "*STB (Read Status Byte)" on page 218
• "*SRE (Service Request Enable)" on page 216
• ":MTERegister[:EVENt] (Mask Test Event Event Register)" on page 243
• ":MTEenable (Mask Test Event Enable Register)" on page 241
To Next Page
Loading...
