Keysight N1911A

STATus Subsystem 11
N1911A/1912A P-Series Power Meters Programming Guide 471
Syntax
Parameters
Query
:NTRansition?
The query returns a 15 bit decimal-weighted number representing the contents of
the Negative Transition Register of the SCPI register set being queried. The format
of the return is <NR1> in the range of 0 to 32767 (2
15
–1).
:PTRansition <NRf>|<non-decimal numeric>
This command is used to set the Positive Transition Register of the SCPI Register
Set you require to control. The first 15 bits of the input parameter are written into
the Positive Transition Register of the SCPI Register Set concerned. The last bit
(bit 15) is always set to 0.
Type Description Range of Values
NRf The value used to set the NTR Register.
0 to 2
16
–1
non-decimal numeric
NRf
non-decimal numeric
?
:NTR
space