Kyocera TASKalfa 400ci - Page 114

2JZ/2JX/2JV/2H7-1
1-3-70
U140
Setting: [Dev Roll1 Normal]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.
3. Press the start key. The value is set.
Setting: [Roll1 Normal Int]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.
3. Press the start key. The value is set.
Setting: [Roll1 ON/OFF KC]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.
3. Press the start key. The value is set.
Maintenance
item No.
Description
Display Description
Setting
range
Initial
setting
Dev Roll1 N (C) Developing magnet roller bias for cyan 0 to 255 162
Dev Roll1 N (M) Developing sleeve roller bias for magenta 0 to 255 162
Dev Roll1 N (Y) Developing sleeve roller bias for yellow 0 to 255 162
Dev Roll1 N (K) Developing sleeve roller bias for black 0 to 255 162
Dev Roll1 N (BW) Developing sleeve roller bias in black/white mode 0 to 255 162
Display Description
Setting
range
Initial
setting
Roll1 N (C) Int Developing magnet roller paper interval bias for
cyan
0 to 255 85
Roll1 N (M) Int Developing magnet roller paper interval bias for
magenta
0 to 255 85
Roll1 N (Y) Int Developing magnet roller paper interval bias for
yellow
0 to 255 85
Roll1 N (K) Int Developing magnet roller paper interval bias for
black
0 to 255 85
Roll1 N (BW) Int Developing magnet roller paper interval bias in
black/white mode
0 to 255 89
Display Description
Setting
range
Initial
setting
Roll1 ON TimingC Developing magnet roller ON timing for cyan 0 to 255 0
Roll1 ON TimingM Developing magnet roller ON timing for magenta 0 to 255 0
Roll1 ON TimingY Developing magnet roller ON timing for yellow 0 to 255 0
Roll1 ON TimingK Developing magnet roller ON timing for black 0 to 255 0
Roll1 ON
TimingBW
Developing magnet roller ON timing in black/white
mode
0 to 255 0
Roll1 OFF TimingC Developing magnet roller OFF timing for cyan 0 to 255 0
Roll1 OFF Tim- Developing magnet roller OFF timing for magenta 0 to 255 0
Roll1 OFF TimingY Developing magnet roller OFF timing for yellow 0 to 255 0
Roll1 OFF TimingK Developing magnet roller OFF timing for black 0 to 255 0
Roll1 OFF
TimingBW
Developing magnet roller OFF timing in black/
white mode
0 to 255 0