Kyocera TASKalfa 400ci - Page 115

2JZ/2JX/2JV/2H7-1
1-3-71
U140
Setting: [DEV Roll Freq]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.
3. Press the start key. The value is set.
Setting: [DEV Roll Duty]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.
3. Press the start key. The value is set.
Setting: [Dev Roll2 DC Interval]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.
*1: 40/40, 50/40 ppm model *2: 25/25, 30/30 ppm model
3. Press the start key. The value is set.
Maintenance
item No.
Description
Display Description
Setting
range
Initial
setting
Dev Roll1 Freq C Developing magnet roller frequency for cyan 0 to 5000 858
Dev Roll1 Freq M Developing magnet roller frequency for magenta 0 to 5000 858
Dev Roll1 Freq Y Developing magnet roller frequency for yellow 0 to 5000 858
Dev Roll1 Freq B Developing magnet roller frequency for black 0 to 5000 858
Dev Roll1 Freq BW Developing magnet roller frequency in black/white
mode
0 to 5000 858
Display Description
Setting
range
Initial
setting
Dev Roll1 Duty C Developing magnet roller Duty for cyan 0 to 5000 373
Dev Roll1 Duty M Developing magnet roller Duty for magenta 0 to 5000 373
Dev Roll1 Duty Y Developing magnet roller Duty for yellow 0 to 5000 373
Dev Roll1 Duty B Developing magnet roller Duty for black 0 to 5000 373
Dev Roll1 Duty BW Developing magnet roller Duty in black/white mode 0 to 5000 313
Display Description
Setting
range
Initial
setting
Roll2 DC (C) Int Developing sleeve roller paper interval DC bias for
cyan
0 to 255 93
*1
/80
*2
Roll2 DC (M) Int Developing sleeve roller paper interval DC bias for
magenta
0 to 255 93
*1
/80
*2
Roll2 DC (Y) Int Developing sleeve roller paper interval DC bias for
yellow
0 to 255 93
*1
/80
*2
Roll2 DC (K) Int Developing sleeve roller paper interval DC bias for
black
0 to 255 93
*1
/80
*2