Kyocera TASKalfa 400ci - Page 140

2JZ/2JX/2JV/2H7
1-3-96
U246
Setting: [STAPLE POS ADJ]
1. Select [STAPLE POS ADJ (A4R/LTR)], [STAPLE POS ADJ (B4R/LGR)] or [STAPLE POS ADJ (A3/LD)].
2. Change the setting value using the +/- or numeric keys.
When staples are placed too far right (sample 1), decrease the preset value. When staples are placed
too far left (sample 2), increase the preset value.
Reference value: within ± 2 mm
Figure 1-3-20
3. Press the start key. The value is set.
Setting: [SADDLE POS ADJ]
1. Select [SADDLE POS ADJ (A4R/LTR)], [SADDLE POS ADJ (B4R/LGR)] or [SADDLE POS ADJ (A3/LD)].
2. Change the setting value using the +/- or numeric keys.
When the centerfold position too far right (sample 1), increase the preset value. When the centerfold
position too far left (sample 2), decrease the setting value.
Reference value: within ± 3 mm
Figure 1-3-21
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Description
Setting
range
Initial
setting
Change in
value per step
Adjustment of booklet stapling position for A4/Letter size -10 to 10 0 0.55 mm
Adjustment of booklet stapling position for B4/Legal size -10 to 10 0 0.55 mm
Adjustment of booklet stapling position for A3/Ledger size -10 to 10 0 0.55 mm
Sample 2
Sample 1
2 mm2 mm
Description
Setting
range
Initial
setting
Change in
value per step
Adjustment of center folding position for A4/Letter size -10 to 10 0 0.55 mm
Adjustment of center folding position for B4/Legal size -10 to 10 0 0.55 mm
Adjustment of center folding position for A3/Ledger size -10 to 10 0 0.55 mm
Sample 2
Sample 1
3 mm
3 mm
Center line