2JZ/2JX/2JV/2H7
1-4-11
Optional
finisher
91
Finisher cover
open
(3000-sheet document finisher)
The front cover, top cover or right sub tray is opened
when starting the finisher operation.
The centerfold unit top cover is opened when start-
ing the center-fold operation.
The mailbox cover is opened when starting the oper-
ation.
---
(Document finisher)
The finisher cover becomes open during paper is
running.
Paper is remaininig in paths at power on.
---
92
Eject paper sensor
non-arrival jam
(document finisher
only)
In the straight mode, the eject paper sensor (EPS) is
not turned on even if a specified time has elapsed
after the paper entry sensor (PES) was turned on.
---
93
Reverse sensor
jam (document fin-
isher only)
The reverse sensor (SBS) does not turn on within
specified time of paper entry sensor (PES) turning
on (unfinished reversing canceled).
402 ms 479 ms 671 ms
The reverse sensor (SBS) is not turned on within
specified time (unfinished reversing set).
431 ms 431 ms 431 ms
The reverse sensor (SBS) is not turned off within
specified time its turning on (resident reversing can-
celed).
1680 ms 2000 ms 2800 ms
The reverse sensor (SBS) is not turned off within
specified time its turning on (resident reversing set).
700 ms 700 ms 700 ms
94
Paper entry sen-
sor stay/remaining
jam (document fin-
isher only)
The paper entry sensor (PES) is not turned off within
specified time its turning on.
1260 ms 1500 ms 2100 ms
95
Paper conveying
sensor jam (docu-
ment finisher only)
The paper conveying sensor (PCS) is not turned off
within specified time its turning on (reversing can-
celed).
1260 ms 1500 ms 2100 ms
The paper conveying sensor (PCS) is not turned off
within specified time its turning on (reversing set).
656 ms 656 ms 656 ms
Section Jam code Conditions
Specified time
25/25 ppm
30/30 ppm
40/40 ppm
50/40 ppm
Color
50/40 ppm
B/W
To Next Page
Loading...
