Kyocera TASKalfa 400ci - Page 210

2JZ/2JX/2JV/2H7
1-4-10
Optional
finisher
89
Jam in center-fold-
ing unit (3000-
sheet document
finisher only)
The centerfold paper entry sensor (CPES) does not
turn off within specified time of centerfold paper con-
veying sensor (CPCS) turning on.
5373 ms 3838 ms 3224 ms
The centerfold paper entry sensor (CPES) does not
turn on within specified time of centerfold paper con-
veying sensor (CPCS) turning on.
5373 ms 3838 ms 3224 ms
The centerfold paper entry sensor (CPES) is not
turned off within specified time of its turning on.
2313 ms 2313 ms 2313 ms
The centerfold eject switch (CESW) is not turned on
within specified time.
4080 ms 4080 ms 4080 ms
The centerfold eject switch (CESW) is not turned off
within specified time of its turning on.
8200 ms 8200 ms 8200 ms
Centerfold side registration sensor 1 (CSRS1) is not
turned on within specified time.
600 ms 600 ms 600 ms
89
Jam in center-fold-
ing unit (3000-
sheet document
finisher only)
Centerfold side registration sensor 2 (CSRS2) is not
turned on within specified time.
600 ms 600 ms 600 ms
The home position is not detected within the speci-
fied time after driving the centerfold staple motor
(CSTM).
1000 ms 1000 ms 1000 ms
The centerfold paper conveying sensor (CPCS) is
not turned off within specified time.
1370 ms 1370 ms 1370 ms
The centerfold paper conveying sensor (CPCS) is
not turned on within specified time.
1370 ms 1370 ms 1370 ms
The centerfold paper conveying sensor (CPCS) is
not turned off within specified time of its turning on.
2313 ms 2313 ms 2313 ms
90
Jam in mailbox
(3000-sheet docu-
ment finisher only)
The tray eject sensor (TEJS) does not turn on within
specified time from start of paper eject (tray 1).
5120 ms 3657 ms 3072 ms
The tray eject sensor (TEJS) does not turn on within
specified time from start of paper eject (tray 2).
4633 ms 3310 ms 2780 ms
The tray eject sensor (TEJS) does not turn on within
specified time from start of paper eject (tray 3).
4147 ms 2962 ms 2488 ms
The tray eject sensor (TEJS) does not turn on within
specified time from start of paper eject (tray 4).
3660 ms 2614 ms 2196 ms
The tray eject sensor (TEJS) does not turn on within
specified time from start of paper eject (tray 5).
3173 ms 2267 ms 1904 ms
The tray eject sensor (TEJS) does not turn on within
specified time from start of paper eject (tray 6).
2687 ms 1919 ms 1612 ms
The tray eject sensor (TEJS) does not turn on within
specified time from start of paper eject (tray 7).
2200 ms 1571 ms 1320 ms
The tray eject sensor (TEJS) is not turned off within
specified time of its turning on.
Depends
on paper
size
Depends
on paper
size
Depends
on paper
size
Section Jam code Conditions
Specified time
25/25 ppm
30/30 ppm
40/40 ppm
50/40 ppm
Color
50/40 ppm
B/W