Kyocera TASKalfa 400ci - Page 38

2JZ/2JX/2JV/2H7-1
1-2-16
8. Remove the rear upper filter cover.
9. Remove nine screws and then remove the
rear upper cover.
Figure 1-2-20
10. Remove the connector.
11. Remove the relay connector.
12. Release wire saddle 1 and 2, and then
remove the wire.
Figure 1-2-21
Rear upper
filter cover
Screws
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Rear upper cover
Relay
connector
Connector
Wire saddle 1
Wire saddle 2
Wire