2JZ/2JX/2JV/2H7-1
1-2-17
13. Remove two connectors (YC17 and YC21).
14. Remove the screw and then remove the
clamp.
15. Remove the connector (YC12).
16. Release wire saddle 1 and 2, and then
remove the wires.
17. While pressing and holding the lock levers,
remove the three connectors (YC3, YC4
and YC11).
18. Release wire saddles 3 to 6, and then
remove the wires.
Figure 1-2-22
Wire
saddle 6
Wire
saddle 3
Wire
saddle 4
Wire
saddle 5
Connector
(YC11)
Connector
(YC11)
Connector
(YC3,YC4)
Connector
(YC3)
Connector
(YC4)
Screw
Clamp
Connector
(YC21)
Connector
(YC17)
Lock lever
Lock lever
Lock lever
Lock lever
Connector
(YC12)
Wire saddle 1
Wire saddle 2
Wire
Wire
Wire
Wire
To Next Page
Loading...
