2JZ/2JX/2JV/2H7-1
1-2-21
31. Pass the connector of the key counter wire
through the aperture in the upper right
cover.
32. Refit the upper right cover.
Figure 1-2-29
33. Pass the key counter wire through the aper-
ture in the key counter cover retainer.
34. Insert the projection of the key counter cover
retainer in the slit of the upper right cover.
35. Fit the key counter cover retainer using the
M4 x 20 screw.
Figure 1-2-30
Key counter wire
(302H746930)
Upper right cover
Connector
Aperture
Key counter wire
(302H746930)
M4 x 20 screw
(7BB100420H)
Upper right cover
Key counter
cover retainer
(302GR03010)
Slit
Projection
Aperture
To Next Page
Loading...
